Faster deltabot / kossel / rostock printer
編輯歷史
| 時間 | 作者 | 版本 |
|---|---|---|
| 2017-07-24 13:10 – 13:16 | r0 – r3 | |
顯示 diff+ Faster deltabot / kossel / rostock printer
+ TRAMS
+ Trinamic RAMPS , might not faster but better
+
+
+ The Mega2560 + RAMPS 1.4 is not fast enough for delta printer. So we should select some ARM 32 based solution
+ ref
+ *Choosing Boards faster than RAMPS
+ *Choosing a 32-bit board
+
+
+ Arduino Due
+ The Arduino Due is a microcontroller board based on the Atmel SAM3X8E ARM Cortex-M3 CPU (datasheet). It is the first Arduino board based on a 32-bit ARM core microcontroller. It has 54 digital input/output pins (of which 12 can be used as PWM outputs), 12 analog inputs, 4 UARTs (hardware serial ports), a 84 MHz clock, an USB OTG capable connection, 2 DAC (digital to analog), 2 TWI, a power jack, an SPI header, a JTAG header, a reset button and an erase button.
+ FW: Repetier Firmware 0.92
+ HW:
+ * Arduino due + RAMPS FD (don't use geetech version, it's too old v1 & bad production quality ,too buggy ). There is V3 ?
+ * Arduino due + RADDS http://reprapteile.de/elektronik/radds.html
+ *Arduino due + Smart RAMPS http://reprap.org/wiki/SMART_RAMPS
+ *Perfect delta auto-calibration in 30 seconds on duet! different board & fw based on reprap pro
+
+ Smoothie
+ NXP LPC 1768/9 32-bits Cortex-M3 MCU, running at 96 to 120Mhz. 512kB Flash, 64kB RAM.
+ FW: Smoothieware 從Marlin -> Smoothieware howto
+ Compatible boards
+ *Smoothieboard 安裝Walkthrough protect
+ *Azteeg X5 mini 目前困擾是DRV8825對步進搭配上很不好找到比較沒有底噪的電流組合,這問題隨著不同型號步進馬達會變化
+ *3DPCB
+ *Momoinololu M3[Rev 1.0]
+ *AZSMZ 因為有搭配的LCD,在LCD方面安裝簡易. 穩定性待觀察,(還有因為沒有放brd違反OSHW的問題)
+ *SUNBEAM 2.0
+ *Brainboard V2 Dead? 出現在濤寶
+ *MKS SBASE V1.x 可接GLCD(但mks似乎有自己的sbase特別版本)
+ *MKS Smini 更小張的簡化sbase版本
+ *MP-DCSYboard 1.0
+
+ Duet
+ Similar to DUE but firmware ReprapPro based
+ dc42 have some work on deltabot support fw
+ PanelDue
+
+ BBB Beagle Bone Black
+ Beagle Board Black
+
+ Processor: AM335x 1GHz ARM® Cortex-A8
+ *512MB DDR3 RAM
+ *4GB 8-bit eMMC on-board flash storage
+ *3D graphics accelerator
+ *NEON floating-point accelerator
+ *2x PRU 32-bit microcontrollers
+
+ Connectivity
+ *USB client for power & communications
+ *USB host
+ *Ethernet
+ *HDMI
+ *2x 46 pin headers
+ HW:
+ * BBB + CRAMPS 2.2.x (FW: MachineKit + Linux CNC)
+ *BBB + T-Bone (another FW, might not support delta, motion control offload to leornado)
+ *BBB + Replicape (FW: linux + redeem ) Rev.B
+ *FastBotBBP
+ STM32 based
+ (Almost all closed source from CHINA) github MakerLab Reference
+ STM32F103ZET6
+ *赤兔 Firmware based unknown, A4988, color touch panel review
+ *PING 3D 用的是赤兔訂製版本
+ *神貓工作室风车版UM2精简机定制控制板正式版 Firmware is Marlin 1.0.2 based, stepper stick, color touch panel
|
||